| Why Portec? |
| PRODUCTS |
| Belt Power Curves |
| Spiral Belts |
| Spiral Chutes |
| Angle Merge |
| Straight Belts |
| Strip Belt Merge |
| Powered Face Diverters |
| Spare Parts |
|
|
| Why Portec? |
| PRODUCTS |
| Belt Power Curves |
| Spiral Belts |
| Spiral Chutes |
| Angle Merge |
| Straight Belts |
| Strip Belt Merge |
| Powered Face Diverters |
| Spare Parts |
|
|
PPMA 2008
NEC Birmingham, UK
Sep 30-Oct 2
Booth B86
iN-AirPort 2008
Incheon, KOREA
Oct 15-17
CeMAT Asia
Shanghai, CHINA
Oct 27-30
Pack Expo
Chicago
Nov 9-13
Booth 6728
Portec SG Belt Power Curves
TECHNICAL SPECIFICATIONS
This is only a small example of the model sizes available from Portec. There are 4 standard family sizes of Portec Belt Power Curves based upon the outside conveying radius (C) and a range of conveying widths (F). Any conveying width within the available range and having one of the 3 standard outside conveying radii would be considered a standard model. While Portec frequently designs and builds special radius belt curves, the standard models represent the best value and shortest production lead-time.
| Model Numbers | Constant Dimensions | Inside Radius A | Conveying Centerline B | Conveying Width F | End Roll Dia. @ Centerline | Gear-In 1 rpm=ft |
|---|---|---|---|---|---|---|
| "A" Belt Curve Family (200-635 conveying width) | ||||||
| 1000M200 |
C-1200 D=1289 Frame Ht.=216 Std. Shaft Dia.=25 |
1000 |
1100 |
200 |
121 |
373 |
| 900M300 |
900 |
1050 |
300 |
115 |
356 |
|
| 800M400 |
800 |
1000 |
400 |
110 |
339 |
|
| 750M450 |
750 |
975 |
450 |
107 |
331 |
|
| 700M500 |
700 |
950 |
500 |
104 |
322 |
|
| 600M600 |
600 |
900 |
600 |
99 |
305 |
|
| 565M635 |
565 |
882.5 |
635 |
97 |
299 |
|
| "B" Belt curve Family (200-940 conveying width") | ||||||
| 1300M200 |
C=1500 D=1589 Frame Ht.=216 St. Shaft Dia.=30 |
1300 |
1400 |
200 |
124 |
384 |
| 1150M350 |
1150 |
1325 |
350 |
117 |
363 |
|
| 1000M500 |
1000 |
1250 |
500 |
111 |
343 |
|
| 850M650 |
850 |
1175 |
650 |
104 |
322 |
|
| 750M750 |
750 |
1125 |
750 |
100 |
308 |
|
| 675M825 |
675 |
1087.5 |
825 |
97 |
298 |
|
| 560M940 |
560 |
1030 |
940 |
92 |
282 |
|
| "C" Belt Curve Family (200-1000 conveying width") | ||||||
| 2000M200 |
C=2200 D=2289 Frame Ht.=216 Std. Shaft D ia.=35 |
2000 |
2100 |
200 |
128 |
398 |
| 1825M375 |
1825 |
2012.5 |
375 |
123 |
381 |
|
| 1700M500 |
1700 |
1950 |
500 |
119 |
369 |
|
| 1575M625 |
1575 |
1887.5 |
625 |
116 |
357 |
|
| 1450M750 |
1450 |
1825 |
750 |
112 |
346 |
|
| 1375M825 |
1375 |
1787.5 |
825 |
110 |
338 |
|
| 1200M1000 |
1000 |
1700 |
1000 |
104 |
322 |
|
| "HC" Belt Curve Family (1001-1235 conveying width) | ||||||
| 1170HM1030 |
C=2200 D=2289 Frame Ht.=305 Std Shaft Dia.=35 |
1170 |
1685 |
1030 |
152 |
473 |
| 1120HM1080 |
1120 |
1660 |
1080 |
150 |
466 |
|
| 1070HM1130 |
1070 |
1635 |
1130 |
148 |
459 |
|
| 1000HM1200 |
1000 |
1600 |
1200 |
145 |
449 |
|
| 965HM1235 |
965 |
1582.5 |
1235 |
143 |
444 |
|
*End roll
diameter at conveying centerline including belt thickness of 2.9 mm. |
||||||
Notes: Conveying
width (F) is equivalent to "between sideguard" (BSG) width
or "between frame" (BF) width. The exposed belt width is
approximately 12 mm narrower than the nominal conveying width (F). The outside radius frame, chain cover and both sideguards extend 9.5 mm past the true angle at both ends of the conveyor. The inside radius frame length matches the true angle. |
||||||
Application Specials
Portec Flomaster can design and build the Belt Power Curve to meet your
special application requirements. Special radius and food grade stainless
steel designs are just a few of the many possible specials that Flomaster
will do to meet your needs. Portec belt curves are available in a wide range
of angles up to 350 degrees.
About
|Legal |Driving Directions |Email | Links | 2007 Portec Flomaster
