| Why Portec? |
| PRODUCTS |
| Belt Power Curves |
| Spiral Belts |
| Spiral Chutes |
| Angle Merge |
| Straight Belts |
| Strip Belt Merge |
| Powered Face Diverters |
| Spare Parts |
|
|
| Why Portec? |
| PRODUCTS |
| Belt Power Curves |
| Spiral Belts |
| Spiral Chutes |
| Angle Merge |
| Straight Belts |
| Strip Belt Merge |
| Powered Face Diverters |
| Spare Parts |
|
|
PPMA 2008
NEC Birmingham, UK
Sep 30-Oct 2
Booth B86
iN-AirPort 2008
Incheon, KOREA
Oct 15-17
CeMAT Asia
Shanghai, CHINA
Oct 27-30
Pack Expo
Chicago
Nov 9-13
Booth 6728
Belt Power Curves
TECHNICAL SPECIFICATIONS
This is only a small example of the model sizes available from Portec. There are 4 standard family sizes of Portec Belt Power Curves based upon the outside conveying radius (C) and a range of conveying widths (F). Any conveying width within the available range and having one of the 3 standard outside conveying radii would be considered a standard model. While Portec frequently designs and builds special radius belt curves, the standard models represent the best value and shortest production lead-time.
| Model Numbers | Constant Dimensions | Inside Radius A | Conveying Centerline B | Conveying Width F | End Roll Dia. @ Centerline | Gear-In 1 rpm=ft |
|---|---|---|---|---|---|---|
| "A" Belt Curve Family (7-25" conveying width) | ||||||
| 40A7 | C-47" D=50.5" Frame Ht.=8.5" Std. Shaft Dia.=1" |
40 |
43.5 |
7 |
4.79 |
1.24 |
| 36A11 | 36 |
41.5 |
11 |
4.58 |
1.18 |
|
| 32A15 | 32 |
39.5 |
15 |
4.36 |
1.12 |
|
| 28A19 | 28 |
37.5 |
19 |
4.14 |
1.07 |
|
| 26A21 | 26 |
36.5 |
21 |
4.03 |
1.04 |
|
| 24A23 | 24 |
35.5 |
23 |
3.92 |
1.01 |
|
| 22A25 | 22 |
34.5 |
25 |
3.82 |
.98 |
|
| "B" Belt curve Family (7-37" conveying width") | ||||||
| 52B7 | C=59" D=62.5" Frame Ht.=8.5" St. Shaft Dia.=1-3/16" |
52 |
55.5 |
7 |
4.92 |
1.27 |
| 44B15 | 44 |
51.5 |
15 |
4.57 |
1.18 |
|
| 40B19 | 40 |
49.5 |
19 |
4.40 |
1.13 |
|
| 32B27 | 32 |
45.5 |
27 |
4.05 |
1.04 |
|
| 28B31 | 28 |
43.5 |
31 |
3.87 |
1.00 |
|
| 26B33 | 26 |
42.5 |
33 |
3.78 |
.97 |
|
| 22B37 | 22 |
40.5 |
37 |
3.61 |
.93 |
|
| "C" Belt Curve Family (7-39.38" conveying width") | ||||||
| 80C7 | C=87" D=90.5" Frame Ht.=8.5" Std. Shaft D ia.=1-7/16" |
80 |
83.5 |
7 |
5.08 |
1.31 |
| 74C13 | 74 |
80.5 |
13 |
4.90 |
1.27 |
|
| 68C19 | 68 |
77.5 |
19 |
4.72 |
1.22 |
|
| 62C25 | 62 |
74.5 |
25 |
4.54 |
1.17 |
|
| 56C31 | 56 |
71.5 |
31 |
4.36 |
1.12 |
|
| 50C37 | 50 |
68.5 |
37 |
4.18 |
1.08 |
|
| 48C39 | 48 |
67.5 |
39 |
4.12 |
1.06 |
|
| "HC" Belt Curve Family (39.39-49" conveying width) | ||||||
| 46HC41 | C=87" D=90.5" Frame Ht.=12" Std Shaft Dia.=1-7/16" |
46 |
66.5 |
41 |
5.99 |
1.55 |
| 44HC43 | 44 |
65.5 |
43 |
5.9 |
1.53 |
|
| 42HC45 | 42 |
64.5 |
45 |
5.81 |
1.5 |
|
| 40HC47 | 40 |
63.5 |
47 |
5.72 |
1.48 |
|
| 38HC49 | 38 |
62.5 |
49 |
5.63 |
1.46 |
|
*End
roll diameter at conveying centerline including belt thickness of
.11". |
||||||
Notes: Conveying
width (F) is equivalent to the "between sideguards" (BSG)
width or "between frame" (BF) width. The exposed belt width
is approximately 1/2" narrower than the nominal conveying width
(F). The outside radius frame, chain cover and both sideguards extend 3/8" past the true angle at both ends of the conveyor. The inside radius frame length matches the true angle. |
||||||
Application Specials
Portec Flomaster can design and build the Belt Power Curve to meet your
special application requirements. Special radius and food grade stainless
steel designs are just a few of the many possible specials that Flomaster
will do to meet your needs. Portec belt curves are available in a wide range
of angles up to 350 degrees.
About
|Legal |Driving Directions |Email | Links | 2007 Portec Flomaster
